DR6/DT6, appareillage modulaire isolé au gaz

Les fonctions DR6/DT6 trouveront leur place dans nombre d’applications combinant l’ensemble des fonctions disponibles, protégeant des transformateurs de distribution de puissance égales ou inférieures à 2500 kVA dans toutes les configurations des réseaux de distribution d’énergie.

Une question technique? Une demande de prix? Besoins speciaux?

Construits pour supporter des conditions graves

Notre limiteur d’arc intégré (Arc Killer) éteint l’arc en 48 millisecondes, 8 fois plus vite qu’un clignement d’œil

Les Arc-Killers brevetés SV25 et SV50 de SGC – SwitchGear Company apportent une sécurité d’un autre niveau. L’opérateur et l’environnement ne sont pas les seuls à être protégés, car le système d’extinction d’arc super rapide permet aux cellules d’être de nouveau opérationnelles très rapidement en cas de défaut interne.

Notre gamme

DR6C-2K

Standard equipment

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Options

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on load break switch and earthing switch
  • No door interlock
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button or remote control
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer with or without auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Specifications and dimensions

Rated voltage kV 12 17,5 24/25
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 668 668 668
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing mm 745 745 745
Weight kg 210 210 210

DR6C-3K

Standard equipment

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Options

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on load break switch and earthing switch
  • No door interlock
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button or remote control
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer with or without auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 968 968 968
Depth mm 880 880 880
Height mm 1422 1422 1422
Height between bottom and bushing mm 745 745 745
Weight kg 315 315 315

DR6C-4K

Standard equipment

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Options

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on load break switch and earthing switch
  • No door interlock
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button or remote control
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer with or without auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 1268 1268 1268
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing mm 745 745 745
Weight kg 420 420 420

DR6C-KT

Standard equipment for the K function

  • Three phase three positions load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the T function

  • Three phase three positions load break switch/fuse combination of the type RV50, according to IEC 62271-105
  • 24kV-63A-Icc25kA with making capacity of 63kÂ
  • Double interlocked earthing switch, with a making capacity up to 50kÂ
  • Fuse holder for HRC fuses
    • e=292 mm DIN 10 / 17.5 kV
    • e=442 mm DIN 10 / 24 kV
    • e=520mm UTE 24 kV
  • Three pole fuse trip in case of one fuse tripping
  • Bushing interface type A, according to DIN EN 50181
  • Switch off mechanism through hitting bolt
  • Cable clamps for monopolar cable with section up to 95mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door without integrated window
  • Floor panels

Options for K and T function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • Motor operation on the load break switch: 24-48- 110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • No door interlock
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control
  • Remote control
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for T function only

  • Tripping coil (24-48-110V DC or 110-230V AC)
  • Time delayed/direct under voltage release (24-48-110V DC or 110-230V AC)
  • Closing coil (24-48-110V DC or 110-230V AC)
  • HRC fuses or spare fuses
  • Fault indiactor “Fuse tripped”
  • Fault contact ‘Fuse tripped’
  • Automatic reclosing
  • Door with integrated window

Specifications and dimensions

Rated voltage kV 12 17,5 24/25
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 718 718 718
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K / T) mm 745 / 325 745 / 325 745 / 325
Fuse size mm 292 (DIN) 292 / 442 (DIN) 292 / 442 / 520 (DIN) / (UTE)
Weight kg 295 295 295

DR6C-K2T

Standard equipment for the K function

  • Three phase three positions load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the T function

  • Three phase three positions load break switch/fuse combination of the type RV50, according to IEC 62271-105
  • 24kV-63A-Icc25kA with making capacity of 63kÂ
  • Double interlocked earthing switch, with a making capacity up to 50kÂ
  • Fuse holder for HRC fuses
    • e=292 mm DIN 10 / 17.5 kV
    • e=442 mm DIN 10 / 24 kV
    • e=520mm UTE 24 kV
  • Three pole fuse trip in case of one fuse tripping
  • Bushing interface type A, according to DIN EN 50181
  • Switch off mechanism through hitting bolt
  • Cable clamps for monopolar cable with section up to 95mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door without integrated window
  • Floor panels

Options for K and T function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • No door interlock
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control
  • Remote control
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type
  • Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for T function only

  • Tripping coil (24-48-110V DC or 110-230V AC)
  • Time delayed/direct under voltage release (24-48-110V DC or 110-230V AC)
  • Closing coil (24-48-110V DC or 110-230V AC)
  • HRC fuses or spare fuse
  • Fault indiactor “Fuse tripped”
  • Fault contact ‘Fuse tripped’
  • Automatic reclosing
  • Door with integrated window

Specifications and dimensions

Rated voltage kV 12 17,5 24/25
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 1068 1068 1068
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K / T) mm 745 / 325 745 / 325 745 / 325
Fuse size mm 292 (DIN) 292 / 442 (DIN) 292 / 442 / 520 (DIN) / (UTE)
Weight kg 485 485 485

DR6C-K3T

Standard equipment for the K function

  • Three phase three positions load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the T function

  • Three phase three positions load break switch/fuse combination of the type RV50, according to IEC 62271-105
  • 24kV-63A-Icc25kA with making capacity of 63kÂ
  • Double interlocked earthing switch, with a making capacity up to 50kÂ
  • Fuse holder for HRC fuses
    • e=292 mm DIN 10 / 17.5 kV
    • e=442 mm DIN 10 / 24 kV
    • e=520mm UTE 24 kV
  • Three pole fuse trip in case of one fuse tripping
  • Bushing interface type A, according to DIN EN 50181
  • Switch off mechanism through hitting bolt
  • Cable clamps for monopolar cable with section up to 95mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door without integrated window
  • Floor panels

Options for K and T function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • No door interlock
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control
  • Remote control
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type
  • Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for T function only

  • Tripping coil (24-48-110V DC or 110-230V AC)
  • Time delayed/direct under voltage release (24-48-110V DC or 110-230V AC)
  • Closing coil (24-48-110V DC or 110-230V AC)
  • HRC fuses or spare fuse
  • Fault indiactor “Fuse tripped”
  • Fault contact ‘Fuse tripped’
  • Automatic reclosing
  • Door with integrated window

Specifications and dimensions

Rated voltage kV 12 17,5 24/25
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 1418 1418 1418
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K / T) mm 745 / 325 745 / 325 745 / 325
Fuse size mm 292 (DIN) 292 / 442 (DIN) 292 / 442 / 520 (DIN) / (UTE)
Weight kg 630 630 630

DR6C-2KT

Standard equipment for the K function

  • Three phase three positions load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240 mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the T function

  • Three phase three positions load break switch/fuse combination of the type RV50, according to IEC62271-105
  • 24kV-63A-Icc25kA with making capacity of 63 kÂ
  • Double interlocked earthing switch, with a making capacity up to 50 kÂ
  • Fuse holder for HRC fuses
    • e=292 mm DIN 10 / 17.5 kV
    • e=442 mm DIN 10 / 24 kV
    • e=520mm UTE 24 kV
  • Three pole fuse trip in case of one fuse tripping
  • Bushing interface type A, according to DIN EN 50181
  • Switch off mechanism through hitting bolt
  • Cable clamps for monopolar cable with section up to 95 mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR3
  • LV compartment
  • Door without integrated window
  • Floor panels

Options for K and T function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • Motor operation on the load break switch: 24-48-110 V DC or 110-230 V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230 V AC
  • No door interlock
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (otherdimensions on request)
  • Push button control
  • Remote control
  • Arc-Killer SV50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for T function only

  • Tripping coil (24-48-110V DC or 110-230 V AC)
  • Time delayed/direct under voltage release (24-48-110 V DC or 110-230 V AC)
  • Closing coil (24-48-110 V DC or 110-230V AC)
  • HRC fuses or spare fuse
  • Fault indiactor “Fuse tripped”
  • Fault contact ‘Fuse tripped’
  • Automatic reclosing
  • Door with integrated window

Specifications and dimensions

Rated voltage kV 12 17,5 24/25
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 1018 1018 1018
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and socket (K / T) mm 745 / 325 745 / 325 745 / 325
Fuse size mm 292 (DIN) 292 / 442 (DIN) 292 / 442 / 520 (DIN) / (UTE)
Weight kg 400 400 400

DR6C-3KT

Standard equipment for the K function

  • Three phase three positions load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the T function

  • Three phase three positions load break switch/fuse combination of the type RV50, according to IEC62271-105
  • 24kV-63A-Icc25kA with making capacity of 63kÂ
  • Double interlocked earthing switch, with a making capacity up to 50kÂ
  • Fuse holder for HRC fuses
    • e=292 mm DIN 10 / 17.5 kV
    • e=442 mm DIN 10 / 24 kV
    • e=520mm UTE 24 kV
  • Three pole fuse trip in case of one fuse tripping
  • Bushing interface type A, according to DIN EN 50181
  • Switch off mechanism through hitting bolt
  • Cable clamps for monopolar cable with section up to 95mm²
  • Door interlock
  • Integrated voltage indicators of the type MevocoHR-3
  • LV compartment
  • Door without integrated window
  • Floor panels

Options for K and T function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • No door interlock
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control
  • Remote control
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type
  • Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for T function only

  • Tripping coil (24-48-110V DC or 110-230V AC)
  • Time delayed/direct under voltage release (24-48-110V DC or 110-230V AC)
  • Closing coil (24-48-110V DC or 110-230V AC)
  • HRC fuses or spare fuse
  • Fault indiactor “Fuse tripped”
  • Fault contact ‘Fuse tripped’
  • Automatic reclosing
  • Door with integrated window

Specifications and dimensions

Rated voltage kV 12 17,5 24/25
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 1318 1318 1318
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K / T) mm 745 / 325 745 / 325 745 / 325
Fuse size mm 292 (DIN) 292 / 442  (DIN) 292 / 442  / 520 (DIN) / (UTE)
Weight kg 600 600 600

DR6C-2K2T

Standard equipment for the K function

  • Three phase three positions load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the T function

  • Three phase three positions load break switch/fuse combination of the type RV50, according to IEC62271-105
  • 24kV-63A-Icc25kA with making capacity of 63kÂ
  • Double interlocked earthing switch, with a makingcapacity up to 50kÂ
  • Fuse holder for HRC fuses
    • e=292 mm DIN 10 / 17.5 kV
    • e=442 mm DIN 10 / 24 kV
    • e=520mm UTE 24 kV
  • Three pole fuse trip in case of one fuse tripping
  • Bushing interface type A, according to DIN EN 50181
  • Switch off mechanism through hitting bolt
  • Cable clamps for monopolar cable with section upto 95mm²
  • Door interlock
  • Integrated voltage indicators of the type MevocoHR-3
  • LV compartment
  • Door without integrated window
  • Floor panels

Options for K and T function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • No door interlock
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control
  • Remote control
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type
  • Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for T function only

  • Tripping coil (24-48-110V DC or 110-230V AC)
  • Time delayed/direct under voltage release (24-48-110V DC or 110-230V AC)
  • Closing coil (24-48-110V DC or 110-230V AC)
  • HRC fuses or spare fuse
  • Fault indiactor “Fuse tripped”
  • Fault contact ‘Fuse tripped’
  • Automatic reclosing
  • Door with integrated window

Specifications and dimensions

Rated voltage kV 12 17,5 24/25
Rated current A 630 630 630
Rated short term current kA 21 21 21
Time of the rated short time current s 3 3 3
Width mm 1368 1368 1368
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K/T) mm 745/325 745/325 745/325
Fuse size mm 292 (DIN) 292/442 (DIN) 292/442/520 (DIN)/(UTE)
Weight kg 640 640 640

DR6C-2D

Standard equipment

  • Three pole vacuum circuit breaker of the type ISM, class E2, M2 according to IEC 62271-100, equipped with a magnetic actuator and integrated digital protection of the type RP-600
  • Three phase multiple rating current transformer (50-150-200-400-600/1 // 2.5VA – cl. 10P4-5P4-5P4-5P4-5P4), integrated in the cable compartment
  • Three phase three position load break switch of thetype RV50, class E3 according to IEC 62271-103
  • Earthing switch with a making capacity of 50kÂ, downstream of the circuit breaker interlocked with the load break switch
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Options

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Set of auxiliary contacts on the circuit breaker
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • No door interlock
  • Motor operation of the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button operation on the load break switch
  • Remote control on the load break switch
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110-230VAC
  • Protection relay specified by customer
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24/25
Rated current A 630 630 630
Rated short term current kA 20 20 20
Time of the rated short time current s 3 3 3
Width mm 918 918 918
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing mm 537 537 537
Weight kg 450 450 450

DR6C-3D

Standard equipment

  • Three pole vacuum circuit breaker of the type ISM, class E2, M2 according to IEC 62271-100, equipped with a magnetic actuator and integrated digital protection of the type RP-600
  • Three phase multiple rating current transformer (50-150-200-400-600/1 // 2.5VA – cl. 10P4-5P4-5P4-5P4-5P4), integrated in the cable compartment
  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Earthing switch with a making capacity of 50kÂ, downstream of the circuit breaker interlocked with the load break switch
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Options

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Set of auxiliary contacts on the circuit breaker
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • No door interlock
  • Motor operation of the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button operation on the load break switch
  • Remote control on the load break switch
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110-230VAC
  • Protection relay specified by customer
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 20 20 16
Time of the rated short time current s 3 3 3
Width mm 1293 1293 1293
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between ground and end socket mm 537 537 537
Weight kg 675 675 675

DR6C-4D

Standard equipment

  • Three pole vacuum circuit breaker of the type ISM, class E2, M2 according to IEC 62271-100, equipped with a magnetic actuator and integrated digital protection of the type RP-600
  • Three phase multiple rating current transformer (50-150-200-400-600/1 // 2.5VA – cl. 10P4-5P4-5P4-5P4-5P4), integrated in the cable compartment
  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Earthing switch with a making capacity of 50kÂ, downstream of the circuit breaker interlocked with the load break switch
  • Bushing interface type C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Options

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Set of auxiliary contacts on the circuit breaker
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • No door interlock
  • Motor operation of the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button operation on the load break switch
  • Remote control on the load break switch
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer
  • Manometer with auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110-230VAC
  • Protection relay specified by customer
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 20 20 16
Time of the rated short time current s 3 3 3
Width mm 1668 1668 1668
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing mm 537 537 537
Weight kg 900 900 900

DR6C-KD

Standard equipment for the K function

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the D function

  • Three pole vacuum circuit breaker of the type ISM, class E2, M2 according to IEC 62271-100, equipped with a magnetic actuator and integrated digital protection of the type RP-600
  • Three phase multiple rating current transformer (50-150-200-400-600/1 // 2.5VA – cl. 10P4-5P4-5P4-5P4-5P4), integrated in the cable compartment
  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Earthing switch with a making capacity of 50 kÂ, downstream of the circuit breaker interlocked with the load break switch
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels

Options for K and D function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • No door interlock
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control on the load break switch
  • Remote control on the load break switch
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer with or without auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for D function only

  • Set of auxiliary contacts on the circuit breaker
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110-230VAC
  • Protection relay specified by customer
  • Test feeding for integrated protection relay (battery bloc)
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 20 20 16
Time of the rated short time current s 3 3 3
Width mm 768 768 768
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K/D) mm 745/537 745/537 745/537
Weight kg 300 300 300

DR6C-K2D

Standard equipment for the K function

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the D function

  • Three pole vacuum circuit breaker of the type ISM, class E2, M2 according to IEC 62271-100, equipped with a magnetic actuator and integrated digital protection of the type RP-600
  • Three phase multiple rating current transformer (50-150-200-400-600/1 // 2.5VA – cl. 10P4-5P4-5P4-5P4-5P4), integrated in the cable compartment
  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Earthing switch with a making capacity of 50 kÂ, downstream of the circuit breaker interlocked with the load break switch
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels

Options for K and D function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • No door interlock
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control on the load break switch
  • Remote control on the load break switch
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer with or without auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type
  • Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for D function only

  • Set of auxiliary contacts on the circuit breaker
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110-230VAC
  • Protection relay specified by customer
  • Test feeding for integrated protection relay (battery bloc)
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 20 20 16
Time of the rated short time current s 3 3 3
Width mm 1118 1118 1118
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K/D) mm 745 / 537 745 / 537 745 / 537
Weight kg 550 550 550

DR6C-K3D

Standard equipment for the K function

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the D function

  • Three pole vacuum circuit breaker of the type ISM, class E2, M2 according to IEC 62271-100, equipped with a magnetic actuator and integrated digital protection of the type RP-600
  • Three phase multiple rating current transformer (50-150-200-400-600/1 // 2.5VA – cl. 10P4-5P4-5P4-5P4-5P4), integrated in the cable compartment
  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Earthing switch with a making capacity of 50 kÂ, downstream of the circuit breaker interlocked with the load break switch
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels

Options for K and D function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • No door interlock
  • Motor operation on the load break switch: 24-48- 110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control on the load break switch
  • Remote control on the load break switch
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer with or without auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for D function only

  • Set of auxiliary contacts on the circuit breaker
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110-230VAC
  • Protection relay specified by customer
  • Test feeding for integrated protection relay (battery bloc)
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 20 20 16
Time of the rated short time current s 3 3 3
Width mm 1493 1493 1493
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K/D) mm 745 / 537 745 / 537 745 / 537
Weight kg 775 775 775

DR6C-2KD

Standard equipment for the K function

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the K function

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Options for K and D function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • No door interlock
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control on the load break switch
  • Remote control on the load break switch
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer with or without auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for D function only

  • Set of auxiliary contacts on the circuit breaker
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110-230VAC
  • Protection relay specified by customer
  • Test feeding for integrated protection relay (battery bloc)
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 20 20 16
Time of the rated short time current s 3 3 3
Width mm 1018 1018 1018
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K/D) mm 745 / 537 745 / 537 745 / 537
Weight kg 400 400 400

DR6C-3KD

Standard equipment for the K function

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the D function

  • Three pole vacuum circuit breaker of the type ISM, class E2, M2 according to IEC 62271-100, equipped with a magnetic actuator and integrated digital protection of the type RP-600
  • Three phase multiple rating current transformer (50-150-200-400-600/1 // 2.5VA – cl. 10P4-5P4-5P4-5P4-5P4), integrated in the cable compartment
  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Earthing switch with a making capacity of 50 kÂ, downstream of the circuit breaker interlocked with the load break switch
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels

Options for K and D function

  • Set of auxiliary contacts on the load break switch
    Set of auxiliary contacts on the earthing switch
    Key interlock on the load break switch
    Key interlock on the earthing switch
    Key interlock on both load break switch and earthing switch
    No door interlock
    Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
    Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
    Short circuit indicator (to be specified by the customer)
    Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
    Push button control on the load break switch
    Remote control on the load break switch
    Arc-Killer SV-50
    Lateral extension
    Manometer with or without auxiliary contact
    Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for D function only

  • Set of auxiliary contacts on the circuit breaker
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110- 230VAC
  • Protection relay specified by customer
  • Test feeding for integrated protection relay (battery bloc)
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 20 20 16
Time of the rated short time current s 3 3 3
Width mm 1318 1318 1318
Depth mm 860 860 860
Height mm 1422 1422 1422
Height between bottom and bushing (K / D) mm 745 / 537 745 / 537 745 / 537
Weight kg 505 505 505

DR6C-2K2D

Standard equipment for the K function

  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Interlocked earthing switch with a making capacity up to max. 50 kÂ
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels
  • Operating handle

Standard equipment for the D function

  • Three pole vacuum circuit breaker of the type ISM, class E2, M2 according to IEC 62271-100, equipped with a magnetic actuator and integrated digital protection of the type RP-600
  • Three phase multiple rating current transformer (50-150-200-400-600/1 // 2.5VA – cl. 10P4-5P4-5P4-5P4-5P4), integrated in the cable compartment
  • Three phase three position load break switch of the type RV50, class E3 according to IEC 62271-103
  • Earthing switch with a making capacity of 50 kÂ, downstream of the circuit breaker interlocked with the load break switch
  • Bushing type interface C, according to DIN EN 50181
  • Cable clamps for monopolar cable with section up to 240mm²
  • Door interlock
  • Integrated voltage indicators of the type Mevoco HR-3
  • LV compartment
  • Door with integrated window
  • Floor panels

Options for K and D function

  • Set of auxiliary contacts on the load break switch
  • Set of auxiliary contacts on the earthing switch
  • Key interlock on the load break switch
  • Key interlock on the earthing switch
  • Key interlock on both load break switch and earthing switch
  • No door interlock
  • Motor operation on the load break switch: 24-48-110V DC or 110-230V AC
  • Motor operation on the earthing switch: 24-48-110V DC or 110-230V AC
  • Short circuit indicator (to be specified by the customer)
  • Cubicle base of a height of 200, 300, 400 mm (other dimensions on request)
  • Push button control on the load break switch
  • Remote control on the load break switch
  • Arc-Killer SV-50
  • Lateral extension
  • Manometer with or without auxiliary contact
  • Integrated voltage indicator of the type ‘Kries CapdisS1+’, ‘Kries CapdiesS2+’, ‘Horstmann type Wega 1.2C’, ‘Horstmann type Wega 2.2C’

Options for D function only

  • Set of auxiliary contacts on the circuit breaker
  • Push button control on the circuit breaker
  • Remote control on the circuit breaker
  • Automatic opening and closing by means of a control module: 24-60V DC or 110-230V AC
  • Time delayed / direct under voltage function by means of an auxiliary relay: 24-48-110V DC or 110-230VAC
  • Protection relay specified by customer
  • Test feeding for integrated protection relay (battery bloc)
  • Automatic reclosing

Specifications and dimensions

Rated voltage kV 12 17,5 24
Rated current A 630 630 630
Rated short term current kA 20 20 16
Time of the rated short time current s 3 3 3
Width mm 1418 1418 1418
Depth mm 860 860 860
Height mm 1410 1410 1410
Height between bottom and bushing (K / D) mm 745 / 537 745 / 537 745 / 537
Weight kg 660 660 660

Notre gamme